Click image to view full size image
3965mm width 170HP motor grader GR165
1.True Photos
2.Specification
| Basic specification | |
| Engine model | SC8D170G2B1 |
| Rated power/speed | 125kW/2300rpm |
| Dimension(LxWxH) | 8900×2625×3470mm |
| Operating weight(Standard) | 15000kg |
| Performance specification | |
| Travelling speed ,forward | 5,8,11,19,23,38 km/h |
| Travelling speed ,reverse | 5,11,23 km/h |
| Tractive force(f=0.75) | 77KN |
| Max. gradeability | 20% |
| Tire inflation pressure | 260 kPa |
| Working hydraulic pressure | 16 MPa |
| Transmission pressure | 1.3~1.8MPa |
| Operating specification | |
| Max. steering angle of front wheels | ±50° |
| Max. lean angle of front wheels | ±17° |
| Max. oscillation angle of front axle | ±15° |
| Max. oscillation angle of balance box | 15 |
| Frame articulation angle | ±27° |
| Min. turning radius using articulation | 7.3m |
| Biade | |
| Maximum lift above ground | 450mm |
| Maximum depth of cutting | 500mm |
| Maximum blade position angle | 90° |
| Blade cutting angle | 28°-70° |
| Circle reversing rotation | 360° |
| Moldboard width X height | 3965×610mm |
3.Configuration
1.SDEC SC8D170G2B1 engine(170HP)
2.customized axle
3.imported world famous differential mechanism
4.Hangzhou Advance gearbox
5.imported world famous hydraulic components
6.customized air-condition cabin
7.3965mm width moldboard
4.Optional Parts
1.front dozer
2.rear ripper
3.rotary support
4.overloaded protection for worn box
5.automatic leveling device
6.front ridger
7.snow remover
8.hydraulic pull-pin
9.cold and warm condition
10.ZF box